hardrive data recoveryHardrive Data Recovery can be achieved in cases of data loss caused by power surges and outages, static electricity, lightning strikes, fires, floods, other natural disasters, sabotage, viruses, equipment malfunctions, accidents and user error (deleted files, formatted / f-disked drives, etc.). In almost all cases hardrive data recovery is successful.

The number one rule when you have lost data is to not write anything more to the affected hard drive. This rule stands true for any situation. If you have deleted a partition by accident, do not create another partition, just leave it blank. If you have deleted files from the recycling bin that you realize you need, do not (if possible) save anything to the drive. The reason for this is that hard drives do not actually erase anything, not data or partitions.

When you erase a file from the operating system, it is just marked on the drive as having been deleted. When the system needs to store more data on the drive, it will consider files on the drive marked “deleted” as being empty space, and cheerfully copy over them. If that happens, you’re in big trouble. This goes double for partitions since partition data only presents the operating system a means of addressing the space available on the drive. If you wipe out a partition everything from it will seem to be gone. So if there is no partition information, no data can be read by the operating system. This does not mean that your data it is not there however, only that you can’t see it. Data recovery programs have no such handicap.

* Hard drive data recovery experts advise never to buy all your hard drives from the same manufacturer lot because these drives often fail together.
* Check your backup files to make sure you’ve saved more than just a file directory.
* Fully restore back-ups periodically to make sure you’ve saved more than just a file directory listing.
* Always save undo files to a floppy disk when you’re using utility programs.
* If a utility program doesn’t allow you to undo program repairs, don’t use it.
* If an unusual noise accompanies a failure message. Don’t run any repair utilities – the recovery engineer will thank you.
* If the machine is already booted up, run a backup immediately.
* Shut down the computer to avoid further damage.

A common technique of file system repair involves scanning the entire drive, making note of all file system structures and possible file boundaries, and then try to match any errors to the specifications of a working file system. This technique is significantly slower than consistency checking, but, it can recover data even if the logical structures are almost totally destroyed. This technique ordinarily does not repair the elementary file system, but simply allows for data to be copied to another storage device.

Hard drive recovery of physically damaged hard disks usually involves replacing damaged or failed components using special tools and hardware along with software programs. Hard disk data recovery of failed components typically include electronics components, read/write heads, head assemblies, magnets, and drive motors. Software vendors have so far tended to make it difficult for customers to delete all data — because they say that’s the way customers want it. Most computer users quite simply do not want to wipe out all data in case they make a mistake.

When a file is “deleted”, only the header is changed to indicate available space. The file actually remains on the drive until it’s overwritten. In many cases, harddrive data recovery is possible with simple software downloadable on the internet. The download and recovery should be to a different drive to avoid overwriting. Most data recovery companies offer a “No Recovery No Charge” policy, free diagnostic evaluation, and free phone consultation. Harddrive data recovery is possible in almost all cases including flood damage, human error (deleted), Fdisked, formatted disks, fire damage, corrupted file systems, virus infections, and hardware failure.

Hard drive repair usually involves removing the disk from the computer, wrapping it as well as possible (anti-static bag and plenty of bubble wrap), and placing it in a good sized box to protect it in transit. Hard drive data recovery companies will physically retrieve data from the damaged disk by disassembling your hard disk in a “clean room”, clean and mark the platters. The platters are then scanned and analogue signals are picked up from the disk.

The signals from your disk are digitised and converted into readable data stored on a new medium (usually a non-destructive data recovery processes that uses drive sector cloning). The data is pulled from your drive on a sector by sector basis, working directly on the clone, to ensure your drive is not damaged further. The quality of the copy depends on how severely damaged the original disk was.

The last step is to analyse the copy in order to determine the logical structure of partitions, file systems and files. When the analysis is finished, the file system is rebuilt and the data is accessible to the user again. For more on system security, cheapest computers, and best web hosting, turn from hardrive data recovery to the Data Recovery sitemap.

Back to the top of Hardrive Data Recovery.